HP AP775A Cisco Nexus 5000 Series Command Reference, Release 4.1(3)N1(1) (OL-1 - Page 334

policy-map type qos Chapter 5 Quality of Service Commands Send comments to [email protected] policy-map type qos To create or modify a policy map and enter the policy map type qos configuration mode, use the policy-map type qos command. To remove a policy map, use the no form of this command. policy-map [type qos] [match-first] qos-policy-map-name no policy-map [type qos] [match-first] qos-policy-map-name Syntax Description match-first qos-policy-map-name (Optional) Specifies that policies associated with the first class that matches the packet characteristics are executed. This is the default action if this option is not specified. Note Because this is the default action, you do not need to enter this variable; it is here to ensure compatibility with other systems. Name assigned to a type qos policy map. Defaults The software enters the policy map type qos configuration mode if you enter the policy-map command without specifying a type. Command Modes Global configuration Command History Release 4.1(3)N1(1) Modification This command was introduced. Usage Guidelines Use the service-policy command to assign policy maps to interfaces. This command does not require a license. Examples This example shows how to create or modify a type qos policy map: switch(config)# policy-map my_policy1 switch(config-pmap-qos)# This example shows how to remove a type qos policy map: switch(config)# no policy-map my_policy1 Related Commands Command service-policy show policy-map Description Attaches a policy map to an interface. Displays policy maps and statistics. 5-16 Cisco Nexus 5000 Series Command Reference OL-16599-01