HP AP775A Cisco Nexus 5000 Series Command Reference, Release 4.1(3)N1(1) (OL-1 - Page 431
Command Default, Command Modes, Command History, Usage Guidelines, Examples, Related Commands, Release
UPC - 884962062708
View all HP AP775A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 431 highlights
Chapter 6 Security Commands radius-server host Send comments to [email protected] username name timeout seconds Specifies a username in the test packets. The maximum size is 32 characters. Specifies the timeout (in seconds) between retransmissions to the RADIUS server. The default is 1 second and the range is from 1 to 60 seconds. Command Default Accounting port: 1813 Authentication port: 1812 Accounting: enabled Authentication: enabled Retransmission count: 1 Idle-time: 0 Server monitoring: disabled Timeout: 5 seconds Test username: test Test password: test Command Modes Configuration mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines When the idle time interval is 0 minutes, periodic RADIUS server monitoring is not performed. Examples This example shows how to configure RADIUS server authentication and accounting parameters: switch(config)# radius-server host 10.10.2.3 key HostKey switch(config)# radius-server host 10.10.2.3 auth-port 2003 switch(config)# radius-server host 10.10.2.3 acct-port 2004 switch(config)# radius-server host 10.10.2.3 accounting switch(config)# radius-server host radius2 key 0 abcd switch(config)# radius-server host radius3 key 7 1234 switch(config)# radius-server host 10.10.2.3 test idle-time 10 switch(config)# radius-server host 10.10.2.3 test username tester switch(config)# radius-server host 10.10.2.3 test password 2B9ka5 Related Commands Command show radius-server Description Displays RADIUS server information. OL-16599-01 Cisco Nexus 5000 Series Command Reference 6-83