HP AP775A Cisco Nexus 5000 Series Command Reference, Release 4.1(3)N1(1) (OL-1 - Page 325

Chapter 5 Quality of Service Commands match cos (class map type qos) Send comments to [email protected] match cos (class map type qos) To define the class of traffic using the Class of Service (CoS) value in a type qos class map, use the match cos command. To remove the match on the CoS value, use the no form of this command. match [not] cos cos-list no match [not] cos cos-list Syntax Description not cos-list (Optional) Negates the specified match result. Matches on the specified COS value or list of specified CoS values. Valid values are from 0 to 7. Defaults None Command Modes Class-map type qos configuration Command History Release 4.1(3)N1(1) Modification This command was introduced. Usage Guidelines To specify a list of values, use one of the following options: • Specify a range of values separated by a dash • Specify a noncontiguous list of values separated by commas Note Only class maps of type qos support the optional not keyword form of this command. Class maps of type queuing do not support the not keyword. This command does not require a license. Examples This example shows how to match on the CoS value for a type qos class map: switch(config)# class-map class_acl switch(config-cmap-qos)# match cos 5-7 Related Commands Command show class-map Description Displays class maps. OL-16599-01 Cisco Nexus 5000 Series Command Reference 5-7