HP AP775A Cisco Nexus 5000 Series Command Reference, Release 4.1(3)N1(1) (OL-1 - Page 342

show policy-map interface brief Chapter 5 Quality of Service Commands Send comments to [email protected] show policy-map interface brief To display policy maps applied to interfaces in a brief format, use the show policy-map interface brief command. show policy-map interface brief Syntax Description This command has no arguments or keywords. Defaults None Command Modes Any command mode Command History Release 4.1(3)N1(1) Modification This command was introduced. Usage Guidelines This command does not require a license. Examples This example shows how to display assigned policy maps in a brief format: switch(config)# show policy-map interface brief Interface/VLAN [Status]:INP QOS OUT QOS INP QUE OUT QUE port-channel5 [Active]: default-in-po default-out-p port-channel20 [Active]: default-in-po default-out-p port-channel30 [Active]: default-in-po default-out-p port-channel37 [Active]: default-in-po default-out-p port-channel50 [Active]: default-in-po default-out-p Ethernet2/2 [Active]: default-in-po default-out-p Ethernet2/3 [Active]: default-in-po default-out-p Related Commands Command show policy-map Description Displays policy maps and statistics. 5-24 Cisco Nexus 5000 Series Command Reference OL-16599-01