HP AP775A Cisco Nexus 5000 Series Command Reference, Release 4.1(3)N1(1) (OL-1 - Page 778
show vpc peer-keepalive, Cisco Nexus 5000 Series Command Reference, OL-16599-01,
UPC - 884962062708
View all HP AP775A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 778 highlights
show vpc peer-keepalive Chapter 10 Vpc Commands Send comments to [email protected] show vpc peer-keepalive To display the destination IP for the virtual port-channel (vPC) peer keepalive message and the status of the messages, use the show vpc peer-keepalive command. show vpc peer-keepalive Syntax Description This command has no arguments or keywords. Defaults None Command Modes Any command mode. Command History Release 4.1(3)N1(1) Modification This command was introduced. Usage Guidelines The show vpc peer-keepalive command displays the destination IP of the peer keepalive message for the vPC. The command also displays the send and receive status as well as the last update from the peer in seconds and milliseconds Note We recommend that you create a separate VRF on the peer devices to send and receive the vPC peer keepalive messages. Do not use the peer link itself to send the vPC peer-keepalive messages. This command is not available if you have not enabled the vPC feature. See feature vpc for information on enabling vPCs. This command does not require a license. Examples This example shows how to display information about the peer-keepalive message: n7k-2(config-vpc-domain)# show vpc peer-keepalive vPC keep-alive status --Send status --Last send at --Sent on interface --Receive status --Last receive at --Received on interface --Last update from peer : peer is alive : Success : 2008.05.17 18:23:53 986 ms : Eth7/16 : Success : 2008.05.17 18:23:54 99 ms : Eth7/16 : (0) seconds, (486) msec vPC Keep-alive parameters --Destination --Keepalive interval --Keepalive timeout --Keepalive hold timeout : 172.23.145.213 : 1000 msec : 5 seconds : 3 seconds 10-14 Cisco Nexus 5000 Series Command Reference OL-16599-01