HP AP775A Cisco Nexus 5000 Series Command Reference, Release 4.1(3)N1(1) (OL-1 - Page 729

Chapter 9 Fibre Channel Show Commands show fcroute Send comments to [email protected] show fcroute Use the show fcroute command to view specific information about existing Fibre Channel and FSPF configurations. show fcroute {distance | label [label] vsan vsan-id | multicast [fc-id vsan vsan-id | vsan vsan-id] | summary [vsan vsan-id] | unicast [[host] fc-id fc-mask vsan vsan-id | vsan vsan-id]} Syntax Description distance label label vsan vsan-id multicast fc-id summary unicast host fc-mask Displays FC route preference. Displays label routes. (Optional) Displays label routes for the specified label. (Optional) Specifies the ID of the VSAN (from 1 to 4093). Displays FC multicast routes. (Optional) Specifies the Fibre Channel ID. Displays the FC routes summary. Displays FC unicast routes. Displays unicast routes for the specified host. Displays unicast routes for hosts that match the range of FC IDs that is specified by the mask. Command Default None Command Modes EXEC mode. Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines When the number of routes are displayed in the command output, both visible and hidden routes are included in the total number of routes. Examples The following example displays administrative distance: switch# show fcroute distance The following example displays multicast routing information: switch# show fcroute multicast The following example displays FCID information for a specified VSAN: switch# show fcroute multicast vsan 3 OL-16599-01 Cisco Nexus 5000 Series Command Reference 9-21