HP Designjet 2000/3000cp HP DesignJet 2500 and 2000CP Printer Quick Reference - Page 82
You opened the left door while the printer was busy, or you have finished
View all HP Designjet 2000/3000cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Check ink system→ Ignore→ Check printheads Abort → Close left door to continue Close roll cover Continue→ After an error has been detected in the ink system, you are given the chance to check it. Press ↑ to check the ink system right now. The printer will indicate which ink systems are affected. Press ↓ to ignore the error and continue printing. In this case the image quality cannot be assured. To fix any errors, see the check-lists in 68, Checking Ink Systems. The printer has detected an error in the printheads indicated by the empty squares. The printhead can be replaced, but you should replace all components of the failing ink systems as soon as possible. Reseat (do not replace) the indicated printheads or press the ↓ key to terminate the procedure. In this case, you will not be able to print, and you may later resume checking the ink system by pressing the Replace Ink System button. (If you have persistent problems, see page 74, If You Have Problems Reseating a Printhead. You opened the left door while the printer was busy, or you have finished installing the ink cartridges. Close the left door to continue. Rewind the media to take up any slack in the roll, close the roll cover, then press ↓ to continue. 82