HP Designjet 2000/3000cp HP DesignJet 2500 and 2000CP Printer Quick Reference - Page 93
Message Explanations and Actions, Replace Ink System, Utilities / Statistics / Code rev
View all HP Designjet 2000/3000cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Message Explanations and Actions MIXED INK SYSTEM 88xxxx No code for UV inks Continue→ Open left door to access ink cartrg. Open right door to access head cleaners The printer has earlier detected components of different ink system types (for example, Imaging and UV Pigmented). Printing will be disabled until the ink systems are all of the same type. The error code "88xxxx" indicates a mixed ink system error. Press the Replace Ink System key to replace the erroneous ink systems in order to print with your printer again. You can press the Enter key to access the main front-panel menu. See 74, If You Have Problems Reseating a Printhead. The printer does not have the correct firmware for the HP DesignJet CP ink system UV currently installed. (This message only applies to firmware revision levels A.01.xx.) Press ↓ to continue, and reinstall the HP DesignJet CP Ink System (Imaging ink system) back into the printer. Access the menu Utilities / Statistics / Code rev to confirm the firmware revision present. If you have a code revision like A.01.xx, you need to upgrade your firmware to code revision A.02.08 or higher to use the HP DesignJet CP Ink System UV. You are doing an ink system replacement. Open the left door to access the ink cartridges. You are doing an ink system replacement. Open the right door to access the printhead cleaners. 93