HP Designjet 2000/3000cp HP DesignJet 2500 and 2000CP Printer Quick Reference - Page 89
Replace Ink System, Enter
View all HP Designjet 2000/3000cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Message Explanations and Actions INK SYSTEM ERROR xxxxxx Install complete Lift lever after aligning The printer has detected an error in the ink system, as shown in earlier messages. Printing will be disabled until the error has been corrected. If more than one error is pending, the one with the highest number, corresponding to the most severe error, will be displayed. Possible error codes (xxxxxx) are: • 58.... See the message "Incorrect ink system" • 65.... or 66.... See the message "Printhead failure" • 67.... See the message "Printhead contact error" • 72.... See the message "Ink cartridge removed" • 73.... See the message "Head cleaner removed" • 74.... See the message "Printhead removed" • 88.... See the message "Mixed ink system". Press the Replace Ink System key to replace the erroneous ink systems in order to print with your printer again. See 74, If You Have Problems Reseating a Printhead. Press the Enter key to access the main front panel menus. Ink system replacement has been completed successfully. Resume normal operations. You have lowered the media lever to align the media with the entry platen. Lift the lever at the right edge of the paper path on the printer when you've finished aligning the roll media as instructed. 89