HP Designjet 2000/3000cp HP DesignJet 2500 and 2000CP Printer Quick Reference - Page 87
This message only, applies to firmware revision levels A.02.08 or higher.
View all HP Designjet 2000/3000cp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Message Explanations and Actions Initializing new ink system Ink cartridge removed → Ink cartridge valve out → In the ink system replacement process, you have swapped an Imaging ink system for a UV Pigmented ink system, or vice versa. The printer will reinitialize and prepare to print with the new ink system. (This message only applies to firmware revision levels A.02.08 or higher.) Wait until the new ink system has been initialized. The printer has detected that one or more ink cartridges have been removed or cannot be detected, as indicated by the flashing squares. Press ↓ to check the failing ink cartridge. Printing has been disabled. You should reseat the ink cartridge immediately; see 72, Checking the Ink Cartridges. If this does not solve the problem, you will have to replace the entire ink system (printhead, printhead cleaner, and ink cartridge) using the Replace Ink System key. If you don't correct the error now, you will see the status message "Ink system error" described on page 89. The printer has detected that one or more of the ink cartridge valves (as indicated by flashing squares) has popped out during refilling. Press ↓ to check the failing ink cartridge. You should reseat the valves immediately; see 72, Checking the Ink Cartridges. If this does not solve the problem, you will have to replace the entire ink system (printhead, printhead cleaner, and ink cartridge) using the Replace Ink System key. 87