HP Dv2910us HP Pavilion dv2500 and dv2700 Notebook PC - Maintenance and Servic - Page 105
Audio board, Display assembly see
UPC - 884420154242
View all HP Dv2910us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Audio board Description Spare part number Audio board for use in dv2500 models (includes audio connectors, infrared lens, and audio board 448626-001 cable) Audio board for use in dv2700 computer models with Intel or AMD processors 463972-001 Audio board for use in dv2700 computer models with an Intel processor and equipped with a WWAN 463973-001 module Audio board for use in dv2500 computer models with an Intel processor and equipped with a WWAN 459765-001 module Before removing the audio board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 56). 5. Remove the following components: a. Hard drive (see Hard drive on page 61) b. WLAN cover (see WLAN module on page 65) c. Optical drive (see Optical drive on page 73) d. Keyboard (see Keyboard on page 74) e. Switch cover (see Switch cover on page 79) f. Display assembly (see Display assembly on page 82) g. Top cover (see Top cover on page 87) Remove the audio board: 1. Release the ZIF connector to which the audio board cable is connected and disconnect the cable (1) from the system board. 2. Remove the two Phillips PM2.5×5.0 screws (2) that secure the audio board to the computer. 3. Release the audio board (3) by sliding it back until the audio connectors disengage from the base enclosure. Component replacement procedures 97