HP Dv2910us HP Pavilion dv2500 and dv2700 Notebook PC - Maintenance and Servic - Page 115

Use the optical drive connector, When replacing the system board

Get HP Dv2910us - Pavilion Entertainment - Core 2 Duo 1.83 GHz PDF manuals and user guides
UPC - 884420154242
View all HP Dv2910us manuals
Add to My Manuals
Save this manual to your list of manuals

Page 115 highlights

When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● RTC battery (see RTC battery on page 70) ● Memory modules (see Memory module on page 71) ● WLAN module (see WLAN module on page 65) ● Modem module (see Modem module on page 95) Remove the system board: 1. Disconnect the power connector cable (1) from the system board. 2. Remove the two Phillips PM2.5×5.0 screws (2) that secure the system board to the computer. 3. Use the optical drive connector (1) to lift the right side of the system board until it rests at an angle. 4. Release the system board (2) by sliding it to the right at an angle until the connectors on the left side of the system board disengage from the base enclosure. 5. Remove the system board (3). Component replacement procedures 107

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
When replacing the system board, be sure that the following components are removed from the defective
system board and installed on the replacement system board:
●
RTC battery (see
RTC battery
on page
70
)
●
Memory modules (see
Memory module
on page
71
)
●
WLAN module (see
WLAN module
on page
65
)
●
Modem module (see
Modem module
on page
95
)
Remove the system board:
1
.
Disconnect the power connector cable
(1)
from the system board.
2
.
Remove the two Phillips PM2.5×5.0 screws
(2)
that secure the system board to the computer.
3
.
Use the optical drive connector
(1)
to lift the right side of the system board until it rests at an angle.
4
.
Release the system board
(2)
by sliding it to the right at an angle until the connectors on the left side
of the system board disengage from the base enclosure.
5
.
Remove the system board
(3)
.
Component replacement procedures
107