HP Engage Flex Pro-C G2 Maintenance and Service Guide - Page 21
Cleaning the monitor, Service considerations, Tools and software requirements, Screws
View all HP Engage Flex Pro-C G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Cleaning the monitor Follow all safety precautions before cleaning dirt and debris from your computer. Use this information to properly clean the monitor. ● Wipe the monitor screen with a clean cloth moistened with water or with a towelette designed for cleaning monitors. Do not use sprays or aerosols directly on the screen; the liquid can seep into the housing and damage a component. Never use solvents or flammable liquids on the monitor. ● To clean the monitor body, follow the procedures in Cleaning the computer case on page 14. Cleaning the mouse Follow all safety precautions before cleaning your mouse. Use this information to properly clean the mouse. To clean the mouse body, follow the procedures in Cleaning the computer case on page 14. Service considerations Keep these considerations in mind during the disassembly and assembly of the computer. Tools and software requirements Servicing the computer requires these tools. ● Torx T-15 screwdriver ● Flat-bladed screwdriver (can sometimes be used in place of the Torx screwdriver) ● Phillips P1 screwdriver ● Nonconductive, nonmarking pry tool ● Diagnostics software Screws The screws used in the computer are not interchangeable. They could have standard or metric threads and might be of different lengths. If you use an incorrect screw during the reassembly process, it can damage the unit. HP strongly recommends that you keep all screws that you remove during disassembly with the removed part and then return them to their proper locations. IMPORTANT: As you remove each subassembly from the computer, place it away from the work area to prevent damage. Cables and connectors Use this information to properly handle cables. Apply only the tension required to seat or unseat the cables during insertion or removal from the connector. Handle cables by the connector whenever possible. In all cases, avoid bending or twisting Cleaning the monitor 15