HP Engage Flex Pro-C G2 Maintenance and Service Guide - Page 25
Access panel, Solid-state drive, For a list of available solid-states drives, see
View all HP Engage Flex Pro-C G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
■ Pull the dust filter straight off the outside of the front bezel. To install the dust filter, reverse the removal procedure. Access panel To remove the access panel, use this procedure and illustration. Before removing the access panel, prepare the computer for disassembly (see Preparation for disassembly on page 18). Remove the access panel: ■ Slide the release latch (1), and then lift the panel (2) up and away from the computer. To install the access panel, reverse the removal procedure. Solid-state drive To remove the solid-state drive, use this procedure and illustration. For a list of available solid-states drives, see Computer major components on page 6. Before removing the solid-state drive, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 18). 2. Remove the access panel (see Access panel on page 19). Access panel 19