HP Engage Flex Pro-C G2 Maintenance and Service Guide - Page 59
Table 5-2, Create POST Power-On
View all HP Engage Flex Pro-C G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Table 5-2 Computer Setup Security Option Description Create BIOS Lets you set and enable a BIOS administrator password, which controls access to the following Administrator Password features: ● Setup Menu (F10) ● Third-Party Option ROM Management (F3) ● Update system ROM ● WMI commands that change system settings ● BIOS Configuration Utility (BCU) ● Alternative power-on password NOTE: Creating a BIOS user disables the Fast Boot option. Change BIOS Administrator Password (This selection is active only if a BIOS administrator password is set.) Lets you change the BIOS administrator password. You must know the current password to be able to change it. Create POST Power-On Password Lets you change or delete power-on password. The power-on password prompt appears after a power cycle or reboot. If the user does not enter the correct power-on password, the unit will not boot. Change POST Power-On Password (This selection is active only if a BIOS administrator password is set.) Lets you change the POST power-on password. You must know the current password to be able to change it. Password Policies Let you set the guidelines for a valid password. Options include: ● Password minimum length ● Requires at least one symbol ● Requires at least one number ● Requires at least one uppercase character ● Requires at least one lowercase character ● Allow spaces Administrator Authentication Policies Let you set limitations on some boot features restricting them to admin only, including: ● Prompt for administrator authorization to access: - Boot menu in POST - System Recovery - Network boot - BIOS update ● Allow the use of administrator credentials to modify the power-on password. Computer Setup Security 53