HP Engage Flex Pro G2 Maintenance and Service Guide - Page 28
Access panel, and then lift the panel
View all HP Engage Flex Pro G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
■ Pull the dust filter straight off the outside of the front bezel. To install the dust filter, reverse the removal procedure. Access panel To remove the access panel, use this procedure and illustration. Before removing the access panel, prepare the computer for disassembly (see Preparation for disassembly on page 20). Remove the access panel: ■ Slide the release latch (1), and then lift the panel (2) up and away from the computer. To install the access panel, reverse the removal procedure. Access panel 21
■
Pull the dust filter straight off the outside of the front bezel.
To install the dust filter, reverse the removal procedure.
Access panel
To remove the access panel, use this procedure and illustration.
Before removing the access panel, prepare the computer for disassembly (see
Preparation for
disassembly
on page
20
).
Remove the access panel:
■
Slide the release latch
(1)
, and then lift the panel
(2)
up and away from the computer.
To install the access panel, reverse the removal procedure.
Access panel
21