HP Engage Flex Pro G2 Maintenance and Service Guide - Page 41
pulling the bracket, off the card.
View all HP Engage Flex Pro G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
b. Pull the expansion card out of the socket on the riser assembly. c. Different expansion cards might require a different bracket. The following illustration provides an example of removing a bracket from an expansion card by removing two screws (1) and pulling the bracket (2) off the card. 2. To remove the riser assembly: 34 Chapter 4 Removal and replacement procedures
b.
Pull the expansion card out of the socket on the riser assembly.
c.
Different expansion cards might require a different bracket. The following illustration provides
an example of removing a bracket from an expansion card by removing two screws
(1)
and
pulling the bracket
(2)
off the card.
2.
To remove the riser assembly:
34
Chapter 4
Removal and replacement procedures