HP Engage Flex Pro G2 Maintenance and Service Guide - Page 40
Riser assembly
View all HP Engage Flex Pro G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
3. To remove a PCI card, pull the expansion card straight up and then away from the inside of the chassis to release it from the chassis frame. Be sure not to scrape the card against other components. CAUTION: After removing an expansion card, you must replace it with a new card or expansion slot cover for proper cooling of internal components during operation. NOTE: Store the removed card in antistatic packaging. To install expansion cards, reverse the removal procedure. Riser assembly To remove the riser assembly and associated expansion cards, use these procedures and illustrations. Before removing the riser assembly, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 20). 2. Remove the access panel (see Access panel on page 21). Remove the riser assembly: 1. To remove an expansion card from the riser assembly: a. If necessary, disconnect the cable from the expansion card. Riser assembly 33