HP Engage Go 10 Maintenance and Service Guide - Page 31
Battery, WARNING
View all HP Engage Go 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
5. Disconnect the following display cables: (1) Touch cable from the touch board reverse ZIF connector. (2) Touch cable from the system board reverse ZIF connector. (3) Display cable from the system board. To install the display assembly, reverse the removal procedure. Battery To remove the battery, use this procedure and illustration. WARNING! To avoid personal injury and damage to the product: ● Do not puncture, twist, or crack the battery. ● Do not cause an external puncture or rupture to the battery. They can cause a short inside the battery, which can result in battery thermal runaway. ● Do not handle or touch the battery enclosure with sharp objects such as tweezers or pliers, which might puncture the battery. ● Do not compress or squeeze the battery case with tools or heavy objects stacked on top of the case. These actions can apply undue force on the battery. ● Do not touch the connectors with any metallic surface or object, such as metal tools, screws, or coins, which can cause shorting across the connectors. Before removing the battery, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 21). 2. Remove the display assembly (see Display assembly on page 21). Remove the battery: 1. Disconnect the battery cable from the system board (1). 2. Remove the four Phillips screws from the battery (2). Battery 23