HP Engage Go 10 Maintenance and Service Guide - Page 46
Remove the Phillips screw that secures the connector, Peel the cable off the computer
View all HP Engage Go 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
2. Use a tool to lift and release the edges of the bump cover, and the lift the cover straight up to remove it. 3. Remove the Phillips screw that secures the connector (1). 4. Peel the cable off the computer (2). 38 Chapter 4 Removal and replacement procedures
2.
Use a tool to lift and release the edges of the bump cover, and the lift the cover straight up to remove it.
3.
Remove the Phillips screw that secures the connector
(1)
.
4.
Peel the cable off the computer
(2)
.
38
Chapter 4
Removal and replacement procedures