HP Engage Go 10 Maintenance and Service Guide - Page 34
Speaker
View all HP Engage Go 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
5. Remove the board from the computer (5). To install the hub board, reverse the removal procedure. Speaker To remove the speaker, use this procedure and illustration. Before removing the speaker, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 21). 2. Remove the display assembly (see Display assembly on page 21). 3. Disconnect the battery cable from the system board (see Battery on page 23). Remove the speaker: 1. Rotate the top WLAN antenna up. 26 Chapter 4 Removal and replacement procedures
5.
Remove the board from the computer
(5)
.
To install the hub board, reverse the removal procedure.
Speaker
To remove the speaker, use this procedure and illustration.
Before removing the speaker, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
21
).
2.
Remove the display assembly (see
Display assembly
on page
21
).
3.
Disconnect the battery cable from the system board (see
Battery
on page
23
).
Remove the speaker:
1.
Rotate the top WLAN antenna up.
26
Chapter 4
Removal and replacement procedures