HP Engage Go 10 Maintenance and Service Guide - Page 43
Daughter board cable, Fingerprint reader cable
View all HP Engage Go 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
(6) Power button board cable (7) Volume board cable (8) Pogo connector cable (9) Fingerprint reader cable (10) Daughter board cable 2. Remove the card reader insert (1). 3. Remove the seven Phillips screws from the board (2). 4. Remove the USB bracket from the board (3). 5. Lift the system board up slightly, and then pull the board away from the USB ports and out of the computer (4). System board 35
(6)
Power button board cable
(7)
Volume board cable
(8)
Pogo connector cable
(9)
Fingerprint reader cable
(10)
Daughter board cable
2.
Remove the card reader insert
(1)
.
3.
Remove the seven Phillips screws from the board
(2)
.
4.
Remove the USB bracket from the board
(3)
.
5.
Lift the system board up slightly, and then pull the board away from the USB ports and out of the
computer
(4)
.
System board
35