HP Integrity rx1620 Installation Guide, Second Edition - HP Integrity rx1620 - Page 25
Replacing the Cover, Aligning the Cover
View all HP Integrity rx1620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Installing and Configuring Removing and Replacing the Cover Step 1. Open the cover by moving the latch handle counter-clockwise. Step 2. Slide the cover toward the rear of the chassis and lift the cover to free the tabs from the slots on the sides of the chassis. Replacing the Cover To replace the cover, perform the following steps: Step 1. Align the tabs on the cover with the slots on the sides of the chassis. Figure 3-10Aligning the Cover Chapter 3 25
Chapter 3
Installing and Configuring
Removing and Replacing the Cover
25
Step 1.
Open the cover by moving the latch handle counter-clockwise.
Step 2.
Slide the cover toward the rear of the chassis and lift the cover to free the tabs from the slots on the
sides of the chassis.
Replacing the Cover
To replace the cover, perform the following steps:
Step 1.
Align the tabs on the cover with the slots on the sides of the chassis.
Figure 3-10Aligning the Cover