HP Integrity rx1620 Installation Guide, Second Edition - HP Integrity rx1620 - Page 61
Systems without a Management Processor Card, Diagnostic LEDs, Power LED, System LED, State
View all HP Integrity rx1620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Data1: Device Removed/Device Absent 0x203E4D0AC6020220 FFFF0008F61B0300 Troubleshooting Identifying and Diagnosing Hardware Problems Log Entry 73: 00:00:12 Alert Level 3: Warning Keyword: Type-02 050301 328449 The server's built-in sensors have detected an open chassis door. Logged by: BMC; Sensor: Physical Security - Chassis Open Data1: State Asserted 0x200000000C020570 FFFF010302050300 NOTE More detailed information on the system logs is presented under "Utilities" in the hp Integrity rx1620 Operations Guide. Systems without a Management Processor Card The system LED states operate the same with systems having the optional management processor card. Table 4-3 Power and System LED States Power LED Off On (green) On (green) On (green) On (green) System LED Off Solid green Blinking green Blinking yellow (1/sec.) Blinking red (2/sec.) State Off Running Booting or running code other than operating system (boot or diagnostic). Attention indication Fault indication Diagnostic LEDs Four diagnostic LEDs are provided on the display panel of the system. Additional diagnostic LEDs are provided on the system board and are described later in this chapter. The diagnostic LEDs warn of impending failures or present failures and allow you to take preventive or corrective action, such as making a system backup or replacing a component. These diagnostic LEDs are labeled 1, 2, 3, and 4. • If no management processor card is installed, the boot progress is monitored by diagnostic LEDs 1 through 4. During the boot-up the LEDs will turn on in sequence until the EFI prompt is reached. Chapter 4 61