HP Integrity rx1620 Installation Guide, Second Edition - HP Integrity rx1620 - Page 70
LAN LEDs, Rear Panel LAN LEDs, LAN A Connector LEDs
View all HP Integrity rx1620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Troubleshooting LAN LEDs LAN LEDs The front panel LAN LED indicates the system is communicating over the Gigabit or system management LAN: • Blinking green, the system is communicating over the LAN. • Solid green, LAN link is established, no current LAN activity. Rear Panel LAN LEDs There are three LAN connectors on the rear panel. They are: • 1Gb LAN A connector • 1Gb LAN B connector • Optional MP 10/100Mb LAN C connector LAN A Connector LEDs The 1Gb LAN A interface provides four LEDs on the rear panel: Table 4-22 1Gb LAN A Connector LEDs LAN LED Location Not used 1000mb Top 2nd from top 100mb 2nd from bottom Activity Bottom Color None Amber Green Green State None Blinking amber - the 1000 Mbps with ethernet protocol and twisted-pair wiring is enabled. Off - no link. Blinking green - the 100 Mbps with ethernet protocol and twisted-pair wiring is enabled. Off - no link. Blinking green - The Activity LED lights, and all other LEDs are off for a 10 Mbps connection. Off - no activity LAN B Connector LEDs The 1Gb LAN B interface provides two LEDs on the rear panel (the LED on the left is not used): Table 4-23 1Gb LAN B Connector LEDs Link LED Output Activity Link w/no activity No link Blinking Orange Solid Orange Off 70 Chapter 4