HP Integrity rx1620 Installation Guide, Second Edition - HP Integrity rx1620 - Page 27
Installing an Additional Processor, Processor Load Order, Processor Location
View all HP Integrity rx1620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installing and Configuring Installing Processors and Memory Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD safety precautions could result in damage to the server. Avoid contact with the processor heatsink if the server has been operating prior to the installation of the additional processor. The heatsink will be safe to touch after the cover has been removed for a few seconds. Installing an Additional Processor CAUTION Ensure that the cache size is identical for all processors. Failure to observe this caution will result in system failure. Ensure that all processors are rated for use at the same speed. Failure to observe this caution will result in performance degradation. Valid processors are identified in "Parts Information" in the hp Integrity rx1620 Maintenance Guide. Processor Load Order Processors are located on the system board. The system board can support either one or two processors. CPU 0 is located to the right of the system board and CPU 1 (when installed) is located on the left of the system board next to the bridge assembly. In a single CPU configuration, the single processor must be installed in CPU 0 slot. Each processor has an associated power pod that is required by the processor. Figure 3-12 Processor Location Rear of Chassis POWER POD CPU 1 POWER POD CPU 0 CPU 0 CPU 1 Chapter 3 27