HP Integrity rx1620 Installation Guide, Second Edition - HP Integrity rx1620 - Page 33
Connecting the Power Cable
View all HP Integrity rx1620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Installing and Configuring Installing Processors and Memory Step 12. Connect the power pod cable to the power connector on the system board. Figure 3-20 Connecting the Power Cable &RONTOFSERVER Step 13. Reinstall sheet metal air duct. Step 14. Replace the cover. Step 15. Verify that the newly installed processor works: • Run the info cpu command at the EFI shell prompt, or • Run cpu diag from Offline Diagnostic CD for full functional check. Chapter 3 33
Chapter 3
Installing and Configuring
Installing Processors and Memory
33
Step 12.
Connect the power pod cable to the power connector on the system board.
Figure 3-20 Connecting the Power Cable
Step 13.
Reinstall sheet metal air duct.
Step 14.
Replace the cover.
Step 15.
Verify that the newly installed processor works:
•
Run the
info cpu
command at the EFI shell prompt, or
•
Run
cpu diag
from Offline Diagnostic CD for full functional check.