HP ML330 HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide - Page 17

System Power Down, After the system power LED is amber, disconnect the power cord. - standby mode

Get HP ML330 - ProLiant - G3 PDF manuals and user guides
UPC - 613326960790
View all HP ML330 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Removal and Replacement Procedures System Power Down WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment, remove the power cord to remove power from the system. The front panel Power On/Standby button does not completely shut off system power. Portions of the power supply and some internal circuitry remain active until AC power is removed. CAUTION: Failure to follow these directions could result in damage to equipment or loss of data. IMPORTANT: If installing a hot-plug device, it is not necessary to power down the system. To power down the server: 1. Back up the server data and record configuration information. 2. Shut down the operating system as directed in the operating system instructions. 3. Press the Power On/Standby button to place the server in standby mode. When the server acquires standby mode, the system power LED goes from green to amber. 4. After the system power LED is amber, disconnect the power cord. 5. Disconnect any other external equipment from the server. 2-4 HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Flashback Part Number: 322375-004 Last Saved On: 1/5/04 11:38 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Removal and Replacement Procedures
System Power Down
WARNING:
To reduce the risk of personal injury, electric shock, or damage to the
equipment, remove the power cord to remove power from the system. The front panel
Power On/Standby button does not completely shut off system power. Portions of the
power supply and some internal circuitry remain active until AC power is removed.
CAUTION:
Failure to follow these directions could result in damage to equipment or loss of
data.
IMPORTANT:
If installing a hot-plug device, it is not necessary to power down the system.
To power down the server:
1.
Back up the server data and record configuration information.
2.
Shut down the operating system as directed in the operating system instructions.
3.
Press the Power On/Standby button to place the server in standby mode. When the server
acquires standby mode, the system power LED goes from green to amber.
4.
After the system power LED is amber, disconnect the power cord.
5.
Disconnect any other external equipment from the server.
2-4
HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide
HP CONFIDENTIAL
Codename: Flashback Part Number: 322375-004 Last Saved On: 1/5/04 11:38 AM