HP ML330 HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide - Page 63
System Configuration Switch, Table 4-7
UPC - 613326960790
View all HP ML330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Component Identification System Configuration Switch CAUTION: Clearing nonvolatile RAM (NVRAM) deletes the system configuration. For instructions on configuring the server, refer to the setup and installation guide. Table 4-7: System Configuration Switch Settings Position Default Description Status 1 Off Reserved - 2 Off Lock configuration Off = Configuration can be changed On = Configuration is locked 3 Off Tower/rack configuration Off = Tower configuration On = Rack configuration 4 Off Diskette boot Off = Server uses RBSU diskette boot selection On = User can override RBSU diskette boot selection and boot from diskette 5 Off Password override Off = Password protection is active On = User can override password 6 Off Clear CMOS and NVRAM* Off = No function On = Server configuration is erased at power-up 7 Off Reserved** - 8 Off Reserved** - * The server serial number must be re-entered through RBSU after clearing the NVRAM. Refer to "Re-entering the Server Serial Number" in Chapter 2. ** Switch positions 1, 7, and 8 are reserved for authorized service providers only. HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide 4-7 HP CONFIDENTIAL Codename: Flashback Part Number: 322375-004 Last Saved On: 1/5/04 11:43 AM