HP ML330 HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide - Page 25

Processor Retention Brackets

Get HP ML330 - ProLiant - G3 PDF manuals and user guides
UPC - 613326960790
View all HP ML330 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Removal and Replacement Procedures Processor Retention Brackets To remove the components: 1. Power down the server. Refer to "System Power Down" in this chapter. 2. Remove the front bezel. Refer to "Front Bezel" in this chapter. 3. Remove the access panel. Refer to "Access Panel" in this chapter. 4. Remove the air baffle. Refer to "Air Baffle" in this chapter. 5. Remove the processor and heatsink/fan assembly. Refer to "Processor and Heatsink/Fan Assembly" in this chapter. 6. Remove the processor retention brackets: a. Remove the screws securing the bracket to the system board. b. Lift the bracket off the system board. To replace the component, reverse the removal procedure. 2-12 HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Flashback Part Number: 322375-004 Last Saved On: 1/5/04 11:38 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Removal and Replacement Procedures
Processor Retention Brackets
To remove the components:
1.
Power down the server. Refer to “System Power Down” in this chapter.
2.
Remove the front bezel. Refer to “Front Bezel” in this chapter.
3.
Remove the access panel. Refer to “Access Panel” in this chapter.
4.
Remove the air baffle. Refer to “Air Baffle” in this chapter.
5.
Remove the processor and heatsink/fan assembly. Refer to “Processor and Heatsink/Fan
Assembly” in this chapter.
6.
Remove the processor retention brackets:
a.
Remove the screws securing the bracket to the system board.
b.
Lift the bracket off the system board.
To replace the component, reverse the removal procedure.
2-12
HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide
HP CONFIDENTIAL
Codename: Flashback Part Number: 322375-004 Last Saved On: 1/5/04 11:38 AM