HP ML330 HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide - Page 28
Power Supply, Disconnect all power cables from the devices and system board.
UPC - 613326960790
View all HP ML330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Removal and Replacement Procedures Power Supply WARNING: To reduce the risk of electric shock or damage to the equipment: • Unplug the power cord before removing the power supply from the server. • Install the power supply before connecting the power cord to the power supply. CAUTION: When sliding the power supply out of the chassis, use one hand to support the weight of the power supply. To remove the component: 1. Power down the server. Refer to "System Power Down" in this chapter. 2. Remove the front bezel. Refer to "Front Bezel" in this chapter. 3. Remove the access panel. Refer to "Access Panel" in this chapter. 4. Remove the air baffle, as needed to access power supply connectors. Refer to "Air Baffle" in this chapter. 5. Disconnect all power cables from the devices and system board. 6. Remove the power supply: a. Remove the four screws securing the power supply to the rear of the chassis. b. Slide the power supply forward. c. Lift the power supply from the chassis. To replace the component, reverse the removal procedure. HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide 2-15 HP CONFIDENTIAL Codename: Flashback Part Number: 322375-004 Last Saved On: 1/5/04 11:38 AM