HP ML330 HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide - Page 39
Array Information, Physical Drive Information, Help
UPC - 613326960790
View all HP ML330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Removal and Replacement Procedures Array Information The Array Information window of the setup screen displays all configured drive arrays. Use this section to create, delete, or edit the existing configurations. The window displays the drive arrays as a node in a tree, like Microsoft® Windows® Explorer. Open the node to display the properties of the array. Press the up arrow and down arrow keys to navigate the properties, and then press the Enter key to edit your selection. CAUTION: Adding or removing drives from a configured array results in data loss. Physical Drive Information The Physical Drive Information window displays all the physical drives connected to the ATA/100 controller channels and the drive properties. Press the up arrow and down arrow keys to navigate this section. You cannot edit information in this window. Help The Help window displays hints on available options and provides a list of keys that you can use to perform tasks, such as: • Switch Windows (the Tab key)-toggles control back and forth between the Array Information and the Physical Drive Information windows. • Auto Configure RAID 0 (the F1 key)-automatically creates and configures a striped array based on the available physical drives installed. • Auto Configure RAID 1 (the F2 key)-automatically creates and configures a mirrored array based on the available physical drives installed. You must have a minimum of two free hard drives in the array. • Auto Configure RAID 0+1 (the F3 key)-automatically creates and configures a RAID 0+1 array based on the available physical drives installed. You must have four hard drives in the array. IMPORTANT: All previous settings are lost when the Auto Configure option is run for striped, mirrored, and RAID 0+1 arrays. • Create Array (the F4 key)-creates a drive array. When this option is selected, a default array template is created. You must edit the array properties to complete the array creation. Use the arrow keys to highlight a property field, and then press the Enter key to edit that property. The array properties are as follows: - Array Type-selects the intended RAID mode including RAID 0, RAID 1, RAID 0+1, and Spare. The default for the Array Type option is RAID 0. - Drive(s)-selects the drives for the array. This term refers to the drive number listed in the Physical Drives Information box, not the number of drives attached. Use the arrow keys, and then press the spacebar to select or deselect the drive or drives. Press the Enter key when done. No default exists for this setting. 2-26 HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Flashback Part Number: 322375-004 Last Saved On: 1/5/04 11:38 AM