HP ML330 HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide - Page 20
Access Panel, Remove the thumbscrew from the front left side of the chassis.
UPC - 613326960790
View all HP ML330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Removal and Replacement Procedures Access Panel WARNING: To reduce the risk of injury from hot surfaces, allow the drives and the internal system components to cool before touching them. CAUTION: Do not operate the server for long periods without the access panel. Operating the server without the access panel results in improper airflow and improper cooling that can lead to thermal damage. NOTE: The interior of the access panel contains labels with information about the server system board. To remove the component: 1. Power down the server. Refer to "System Power Down" in this chapter. 2. Remove the front bezel. Refer to "Front Bezel" in this chapter. 3. Remove the access panel: a. Remove the thumbscrew from the front left side of the chassis. b. Slide the access panel forward. c. Pull from the top of the access panel to remove it from the chassis. To replace the component, reverse the removal procedure. HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide 2-7 HP CONFIDENTIAL Codename: Flashback Part Number: 322375-004 Last Saved On: 1/5/04 11:38 AM