HP Mini 100e HP Mini 100e Education Edition - Maintenance and Service Guide - Page 39
Service access cover, that secure the service access cover to the computer.
View all HP Mini 100e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Service access cover Description Service access cover (included in the Plastics Kit) For use in all countries and regions except Brazil For use in Brazil Spare part number 619575-001 627093-001 Before removing the service access cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 30) Remove the service access cover: 1. Remove the 2 Phillips 2.0x4.0 screws (1) that secure the service access cover to the computer. 2. Lift the service access cover (2) from the middle to release the tabs along the sides and top edge, and then remove the service access cover. Reverse this procedure to install the service access cover. Component replacement procedures 31