HP Mini 100e HP Mini 100e Education Edition - Maintenance and Service Guide - Page 59
that secure each hinge to the display back cover., Remove the 2 Phillips 2.0×2.0 screws
View all HP Mini 100e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
c. Remove the display panel (4) from the display back cover. 10. If it is necessary to replace the display hinges, follow these steps: a. Remove the 2 Phillips 2.0×2.0 screws (1) that secure each hinge to the display back cover. b. Remove the hinges (2). 11. If it is necessary to replace the display panel cable, follow these steps: a. Peel back the Mylar protection on the back of the display panel (1). Component replacement procedures 51
c.
Remove the display panel
(4)
from the display back cover.
10.
If it is necessary to replace the display hinges, follow these steps:
a.
Remove the 2 Phillips 2.0×2.0 screws
(1)
that secure each hinge to the display back cover.
b.
Remove the hinges
(2)
.
11.
If it is necessary to replace the display panel cable, follow these steps:
a.
Peel back the Mylar protection on the back of the display panel
(1)
.
Component replacement procedures
51