HP Mini 100e HP Mini 100e Education Edition - Maintenance and Service Guide - Page 68
Remove the Phillips 2.0x2.5 screw, Remove the fan and heat sink assembly
View all HP Mini 100e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Remove the fan and heat sink assembly: 1. Disconnect the fan cable from the bottom of the system board. 2. Loosen the 3 captive Phillips 2.0x9.0 screws (1) that secure the heat sink to the system board. NOTE: The screws are numbered 1 through 3. Follow this order when loosening the screws. 3. Remove the Phillips 2.0x2.5 screw (2) that secures the heat sink to the system board. 60 Chapter 4 Removal and replacement procedures
Remove the fan and heat sink assembly:
1.
Disconnect the fan cable from the bottom of the system board.
2.
Loosen the 3 captive Phillips 2.0x9.0 screws
(1)
that secure the heat sink to the system board.
NOTE:
The screws are numbered 1 through 3. Follow this order when loosening the screws.
3.
Remove the Phillips 2.0x2.5 screw
(2)
that secures the heat sink to the system board.
60
Chapter 4
Removal and replacement procedures