HP Mini 100e HP Mini 100e Education Edition - Maintenance and Service Guide - Page 62
System board
View all HP Mini 100e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
3. Remove the Phillips 2.0×6.0 screw (1) that secures the handle bracket to the base enclosure. 4. Remove the handle bracket (2). Reverse this procedure to install the handle. System board Description System board (includes Intel Atom N455, 1.66-GHz processor, 512-KB L2 cache, and replacement thermal material) Spare part number 615969-001 Before removing the system board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Battery (see Battery on page 30) b. Service access cover (see Service access cover on page 31) c. RTC battery (see RTC battery on page 34) d. Memory module (see Memory module on page 32) e. WLAN module (see WLAN module on page 35) 54 Chapter 4 Removal and replacement procedures