HP Mini 5102 HP Mini 5102 - Maintenance and Service Guide - Page 51
Memory module, With the battery removed, slide the battery release latch in front of the memory module
View all HP Mini 5102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Memory module Description Memory module, PC2-6400, shared, 2048-MB NOTE: Not supported by computers with Windows® XP Home SP3, or with Windows 7 Starter installed. Memory module, PC2-6400, shared, 1024-MB Spare part number 598858-001 598861-001 Before removing the memory module, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 41). 5. If your device has WWAN capability, remove the SIM (see SIM on page 42). Remove the memory module: 1. With the battery removed, slide the battery release latch in front of the memory module compartment (1) to release the memory module cover from the computer. 2. Swing the cover up and away from the outside of the computer to remove the cover (2). 3. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The module tilts up.) Component replacement procedures 43