HP Mini 5102 HP Mini 5102 - Maintenance and Service Guide - Page 75

Tabs on the hinge covers, display bezel until the bezel disengages from the display enclosure.

Get HP Mini 5102 PDF manuals and user guides View all HP Mini 5102 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

4. If it is necessary to replace the display bezel, perform the following steps: a. Remove the 4 Mylar screw covers (1) from the corners of the display bezel, and then remove the 4 2.5×3.0 screws (2) that secure the display bezel to the back cover. b. Flex the inside edges of the left and right sides (1), and then the top and bottom (2) of the display bezel until the bezel disengages from the display enclosure. c. Remove the display bezel (3). NOTE: Tabs on the hinge covers (4) lock to insets on the base enclosure. 5. If it is necessary to replace the webcam module, perform the following steps: a. Lift the webcam (1). Component replacement procedures 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
4.
If it is necessary to replace the display bezel, perform the following steps:
a.
Remove the 4 Mylar screw covers
(1)
from the corners of the display bezel, and then remove
the 4 2.5×3.0 screws
(2)
that secure the display bezel to the back cover.
b.
Flex the inside edges of the left and right sides
(1)
, and then the top and bottom
(2)
of the
display bezel until the bezel disengages from the display enclosure.
c.
Remove the display bezel
(3)
.
NOTE:
Tabs on the hinge covers
(4)
lock to insets on the base enclosure.
5.
If it is necessary to replace the webcam module, perform the following steps:
a.
Lift the webcam
(1)
.
Component replacement procedures
67