HP Mini 5102 HP Mini 5102 - Maintenance and Service Guide - Page 56
Mass storage devices, Remove the keyboard see - replace hard drive
View all HP Mini 5102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Mass storage devices NOTE: Each hard drive spare part kit and solid state drive spare part kit includes a bracket and screws. Description Hard drive, 320-GB, 7200-RPM, for use with WWAN option Hard drive, 320-GB, 7200-RPM, SATA Hard drive, 250-GB, 7200-RPM, for use with WWAN option Hard drive, 250-GB, 7200-RPM, SATA Hard drive, 160-GB, 7200-RPM, for use with WWAN option Hard drive, 160-GB, 7200-RPM, SATA Solid state drive, 128-GB, SATA Solid state drive, 80-GB, SATA Spare part number 593643-001 577974-001 593642-001 577973-001 593641-001 577972-001 606971-001 583004-001 Before removing the hard drive or solid state drive, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 41). 5. If your device has WWAN capability, remove the SIM (see SIM on page 42). 6. Remove the keyboard (see Keyboard on page 45). To remove the hard drive or the solid state drive: 1. Loosen the Phillips PM2.5×10.0 captive screw (1), and remove the 2 Phillips PM2.0×3.0 screws (2) that secure the drive assembly to the base enclosure. 48 Chapter 4 Removal and replacement procedures