HP Mini 5102 HP Mini 5102 - Maintenance and Service Guide - Page 69
RTC battery, Remove the RTC battery
View all HP Mini 5102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
RTC battery Description RTC battery Spare part number 507707-001 Before removing the real-time clock (RTC) battery, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 41). 5. If your device has WWAN capability, remove the SIM (see SIM on page 42). 6. Remove the Keyboard (see Keyboard on page 45). 7. Remove the Hard drive (see Mass storage devices on page 48). 8. Remove the Top cover (see Top cover on page 55). Remove the RTC battery: 1. Disconnect the RTC battery cable (1) from the system board. 2. Detach the RTC battery (2) from the system board. NOTE: The RTC battery is attached to the system board with double-sided tape. Reverse this procedure to install the RTC battery. Component replacement procedures 61