HP Mini 5102 HP Mini 5102 - Maintenance and Service Guide - Page 76
Disengage the display panel cable
View all HP Mini 5102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
b. Disconnect the webcam cable (2) from the webcam. c. Remove the webcam. 6. If it is necessary to replace the non-touch display panel, perform the following steps: a. Remove the 8 Phillips PM2.5×5.0 screws that secure the display panel to the display enclosure. b. Lift the bottom edge of the display panel up from the display back cover (1). c. Disengage the display panel cable (2) from the left hinge clip. d. Remove the display panel (3) from the display back cover. 68 Chapter 4 Removal and replacement procedures
b.
Disconnect the webcam cable
(2)
from the webcam.
c.
Remove the webcam.
6.
If it is necessary to replace the non-touch display panel, perform the following steps:
a.
Remove the 8 Phillips PM2.5×5.0 screws that secure the display panel to the display
enclosure.
b.
Lift the bottom edge of the display panel up from the display back cover
(1)
.
c.
Disengage the display panel cable
(2)
from the left hinge clip.
d.
Remove the display panel
(3)
from the display back cover.
68
Chapter 4
Removal and replacement procedures