HP Mini 5102 HP Mini 5102 - Maintenance and Service Guide - Page 79
that secure each hinge to the display panel., If it is necessary to replace the display hinges
View all HP Mini 5102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
c. Release the display panel/webcam cable (1) from the adhesive points (2) along the cable route on the back of the display panel. d. Remove the display panel/wedcam cable. 8. If it is necessary to replace the display hinges, perform the following steps: a. Remove the 2 Phillips PM2.0×3.0 screws (1) that secure each hinge to the display panel. b. Remove the hinges (2). 9. If it is necessary to replace the microphone receiver, perform the following steps: a. Release the microphone receiver from the clip (1) that secures it to the display enclosure. Component replacement procedures 71
c.
Release the display panel/webcam cable
(1)
from the adhesive points
(2)
along the cable
route on the back of the display panel.
d.
Remove the display panel/wedcam cable.
8.
If it is necessary to replace the display hinges, perform the following steps:
a.
Remove the 2 Phillips PM2.0×3.0 screws
(1)
that secure each hinge to the display panel.
b.
Remove the hinges
(2)
.
9.
If it is necessary to replace the microphone receiver, perform the following steps:
a.
Release the microphone receiver from the clip
(1)
that secures it to the display enclosure.
Component replacement procedures
71