HP Pavilion 11-h110nr HP Pavilion 11 x2 PC Maintenance and Service Guide - Page 60

Speakers, Release the left speaker cable from the clips

Get HP Pavilion 11-h110nr PDF manuals and user guides View all HP Pavilion 11-h110nr manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Speakers Description Speaker Kit (includes left and right speakers and cables) Spare part number 740193-001 Before removing the speakers, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display enclosure (see Display enclosure on page 31). 5. Disconnect the tablet battery cable from the system board (see Sensor board on page 32). 6. Remove the bezel (see Bezel on page 50). Remove the speakers: 1. Disconnect the speaker cable (1) from the system board. 2. Release the left speaker cable from the clips (2) built into the display panel assembly. 3. Remove the two Phillips PM1.85×3.35 screws (3) that secure the speakers to the display panel assembly. 4. Remove the speakers (4). Reverse this procedure to install the speakers. 52 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Speakers
Description
Spare part number
Speaker Kit (includes left and right speakers and cables)
740193-001
Before removing the speakers, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the display enclosure (see
Display enclosure
on page
31
).
5.
Disconnect the tablet battery cable from the system board (see
Sensor board
on page
32
).
6.
Remove the bezel (see
Bezel
on page
50
).
Remove the speakers:
1.
Disconnect the speaker cable
(1)
from the system board.
2.
Release the left speaker cable from the clips
(2)
built into the display panel assembly.
3.
Remove the two Phillips PM1.85×3.35 screws
(3)
that secure the speakers to the display
panel assembly.
4.
Remove the speakers
(4)
.
Reverse this procedure to install the speakers.
52
Chapter 5
Removal and replacement procedures