HP Pavilion 11-h110nr HP Pavilion 11 x2 PC Maintenance and Service Guide - Page 61
Power connector board, from the system board.
View all HP Pavilion 11-h110nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Power connector board Description Power connector board (includes cable) Spare part number 742735-001 Before removing the power connector board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display enclosure (see Display enclosure on page 31). 5. Disconnect the tablet battery cable from the system board (see Sensor board on page 32). 6. Remove the bezel (see Bezel on page 50). Remove the power connector board: 1. Disconnect the power connector board cable (1) from the system board. 2. Remove the two Phillips PM1.85×3.35 screws (2) that secure the power connector board to the display panel assembly. 3. Remove the power connector board (3) and cable. Tablet component replacement procedures 53