HP Pavilion All-in-One MS210 Maintenance and Service Guide: HP Pro All-in-One - Page 29
Thermal module
View all HP Pavilion All-in-One MS210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
8. Disconnect the fan cable from the system board (2), and then remove the fan from the computer. To install the fan, reverse the removal procedures. Thermal module 1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 5). 2. Remove the stand (see Stand on page 11). 3. Remove the hard drive (see Hard drive on page 13). 4. Remove the optical drive (see Optical drive on page 16). 5. Remove the back cover (see Back cover on page 18). 6. Remove the system board shield (see System board shield on page 19). 7. Remove the fan (see Fan on page 22). 8. Loosen the captive screws from the thermal module, as follows: a. (1) Two screws for the chipset heat sink b. (2) Four screws for the processor heat sink c. (3) Two screws for the graphics card heat sink Thermal module 23