HP Pavilion zt1100 HP Pavilion Notebook zt1000, xz100 and Omnibook xt1000 Seri - Page 42

Removing the Mini-PCI Card

Page 42 highlights

Removing the Mini-PCI Card Certain notebook models include a mini-PCI card that contains either a modem or combined modem and 802.11 wireless. Table 4. Mini-PCI Card Replacement Part Numbers Description PCA, mini-PCI (modem) PCA, mini-PCI (modem/802.11) Part Number F3377-60950 F3377-60951 Exchange Part Number Caution Provide proper grounding and handle the card only by its edges, or you could damage it through electrostatic discharge. Required Equipment • #0 Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. 2. On the bottom of the notebook, loosen the screw holding the mini-PCI cover (the cover retains the screw), and remove the cover. 3. Press outward to release the latches at the sides of the card, and carefully lift its free edge up. 4. Disconnect the cable(s) from the card. 5. Gently pull the card out of its connector. 42 Removing and Replacing Parts zt1100/xz100 and xt1000 Series Troubleshooting and Self-Repair Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

42
Removing and Replacing Parts
zt1100/xz100 and xt1000 Series
Troubleshooting and Self-Repair Guide
Removing the Mini-PCI Card
Certain notebook models include a mini-PCI card that contains either a modem or combined modem
and 802.11 wireless.
Table 4. Mini-PCI Card Replacement Part Numbers
Description
Part Number
Exchange Part Number
PCA, mini-PCI (modem)
F3377-60950
PCA, mini-PCI (modem/802.11)
F3377-60951
Caution
Provide proper grounding and handle the card only by its edges, or you could damage it through
electrostatic discharge.
Required Equipment
#0 Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. On the bottom of the notebook, loosen the screw holding the mini-PCI cover (the cover retains the
screw), and remove the cover.
3. Press outward to release the latches at the sides of the card, and carefully lift its free edge up.
4. Disconnect the cable(s) from the card.
5. Gently pull the card out of its connector.