HP Presario 6000 Getting Started - Compaq Presario 6000 and 8000 Series Comput - Page 126

or 8000 model by holding the card

Get HP Presario 6000 - Desktop PC PDF manuals and user guides View all HP Presario 6000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 126 highlights

Upgrading the Computer 3. Inside the computer on either the 6000 or 8000 model, locate the expansion slots on the system board. ❏ If you have the 8000 model, continue to step 4. ❏ If you have the 6000 model, skip to step 5. 4. On the 8000 model, remove the screw that secures the expansion card to the chassis. 5. Remove the expansion card from either a 6000 or 8000 model by holding the card at each end and carefully rocking it back and forth until the connectors pull free from the socket. Be sure not to scrape the card against the other components. Removing an Expansion Card on the 6000/8000 (6000 shown) 8-24 Getting Started

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
8–24
Getting Started
Upgrading the Computer
3. Inside the computer on either the 6000 or
8000 model, locate the expansion slots on the
system board.
❏
If you have the 8000 model, continue to
step 4.
❏
If you have the 6000 model, skip to step 5.
4. On the 8000 model, remove the screw that
secures the expansion card to the chassis.
5. Remove the expansion card from either a
6000 or 8000 model by holding the card at
each end and carefully rocking it back and
forth until the connectors pull free from the
socket. Be sure not to scrape the card against
the other components.
Removing an Expansion Card on the 6000/8000
(6000 shown)