HP ProBook 650 Maintenance and Service Guide - Page 130
Hard drive specifications, Solid-state drive specifications, specifications
View all HP ProBook 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Hard drive specifications 1-TB, 5400-rpm SATA* 750-GB, 5400-rpm Hybrid SATA 8GB NAND ** 500-GB, 7200-rpm FIPS SATA Opal2 ** 500-GB, 7200-rpm SATA ** 500-GB, 7200-rpm selfencrypting SATA Opal2 ** Dimensions Height 7.2 mm (0.28 in) Width 69.85 mm (2.75 in) Weight 99 g max Interface type SATA Transfer rate Synchronous (maximum) 600 MB/s Security ATA security Seek times (typical read, including setting) Single track 1.5 ms Average (read/write) 12.0 ms Maximum 22 ms Logical blocks 1,953,525,168 976,773,168 Disk rotational speed 5400 rpm 7200 rpm Operating temperature 0°C to 60°C (32°F to 140°F) *1 TB = 1 trillion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. **1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. NOTE: Certain restrictions and exclusions apply. Contact technical support for details. Solid-state drive specifications Dimensions Weight Height Width Interface type 128 GB 2280 M2 SATA-3 TLC* 180 GB 2280 M2 SATA-3 MLC* 180 GB 2280 M2 SATA-3 selfencryptin g MLC (Opal 2 * 240 GB 2280 M2 SATA-3 MLC* 256 GB 2280 M2 PCIe-3x4 NVMe MLC* 256 GB 2280 M2 SATA-3 selfencryptin g MLC (Opal 2)* 256 GB 2280 M2 SATA-3 TLC* 512 GB SATA - 3 TLC* 10 g 2.38 mm (0.09 in) 22 mm (0.87 in) SATA Gen 3.0 (6 Gb/s) 120 Chapter 14 Specifications