HP ProBook 650 Maintenance and Service Guide - Page 63
into the memory module slot until it is seated., Gently press the memory module down
View all HP ProBook 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. 1. Align the notched edge (1) of the memory module with the tab in the memory module slot. 2. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated. 3. Gently press the memory module down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. CAUTION: To prevent damage to the memory module, be sure that you do not bend the memory module. Component replacement procedures 53
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges only. Do not
touch the components on the memory module.
1.
Align the notched edge
(1)
of the memory module with the tab in the memory module slot.
2.
With the memory module at a 45-degree angle from the surface of the memory module compartment,
press the module
(2)
into the memory module slot until it is seated.
3.
Gently press the memory module down, applying pressure to both the left and right edges of the
memory module, until the retention clips snap into place.
CAUTION:
To prevent damage to the memory module, be sure that you do not bend the memory
module.
Component replacement procedures
53